SCB11 3 Phase Dry Type Transformer

The core material of SCB11 3 phase dry type transformer is a high-quality cold-rolled grain-oriented silicon steel sheet coated with black elastic resin paint on the outer surface, which can effectively reduce the noise and no-load loss rate of the transformer; its high and low voltage windings respectively adopt a segmented layer winding structure And spiral winding structure, and all are round, the axial force distribution is uniform; SCB11 3 phase dry type transformer is particularly good in moisture resistance and corrosion resistance, especially suitable for working in harsh environmental conditions, and does not require a separate transformer room, no need for core maintenance and maintenance. Distinguishing features of load-bearing beams. It is widely used in industrial and mining enterprises, schools, hotels, transportation, post and telecommunications, military, railway, lighting and other places that need voltage transformation.

SCB11 3 phase dry type transformer Features:

1. It can be installed in areas with high safety requirements such as commercial areas and residential areas, which is safe and free from environmental pollution.

2. Maintenance-free, easy to install and use.

3. Resin casting, suitable for wet and dirty environment, excellent moisture-proof performance.

4. Low loss, low discharge, low noise, and even cooling.

5. Strong resistance to short circuit and lightning impact.

6. The low-voltage coil is wound by foil, with compact structure, balanced ampere-turn and small magnetic leakage at the end.

The SCB11 3 phase dry type transformer produced by our company has accounted for more than 30% of our companys annual output value. After continuous optimization and improvement, this series of products is small in size, light in weight, low in loss and cost-effective, and has been widely recognized by customers.

1. Adopt standard: GB 1094.11-2007, GB 1094.16-2013

2. Rated capacity: 10-1600kVA

3. Rated voltage: 690V, 400V, 230V, etc.

4. Insulation class: F class or H class

5. Connection group: according to customer requirements

6. Use environment: 

Altitude: ≤2000m

Adapt to ambient temperature: -10~+45℃

Adapt to relative humidity: ≤95%

Use environment: indoor (when using outdoors, please provide the protection level)